iSat Line

Are you looking for a new purpose and challenge?

We are a systems integrator working for a ME satellite operator, and we’re becoming inundated with project/technical management work.  We would like to take on someone to assist in preparing/writing tenders and testing/integrating/installing/training/documenting projects. We would like to know if anyone is currently looking for a new challenge in small multi-talented team in the Farnborough area.

If this role would interest you then please forward a copy of your CV and a covering letter for review, potentially leading to a meeting. Depending on experience and because we are a small company with big growth prospects, we’re able to configure long term rewards which reflect the effort and contribution made.

All applicants must be able to work in the UK at our headquarters based near the Farnborough Air show.

Thank you and
Very kind regards
David Harper
CEO iSat Ltd

To learn more about iSat LTD:
www.isatnetworks.com

Please send your application to:

info@isatnetworks.com
"iSat install highly efficient Ka systems reducing unwanted loss and maximizing use of expensive amplifiers.
This antenna did not support weight of the amp when mounted on the boom arm, so in this example the amp is fully moveable in Azimuth, but the loss in the waveguide network is less than 0.5dB, compared with over 2dB if traditionally mounted on the antenna post."


"iSat work extensively in Ka band and are especially expert in system below 29.5GHz".

Antenna Reflector recommendation.

Hello, we were wondering if you could help us and our customer by recommending a manufacturer of antenna reflectors who is willing to sell the reflector and backing mount structure and boom arm/feed holder without the post nor the feed, but with the F/D ratio.

We know we can visit the very highly reputable main suppliers who will give us a comprehensive solution, but our customer has established antennas and doesn’t need the full turnkey. Please let us know if there are reflector manufacturers.

The need is tx/rx and at Ku band. We will need to mount our own feed for operation at our own frequency, but Ku reflector will be good for what we need.

Very kind regards
David

iSat
info@isatnetworks.com

Seeking product to put RF on to IP channel.

Dear all,

We’re in the market for a product to put RF on to IP channel.
Clearly we’re using the IP to multiplex a lot of traffic and put it over satellite.
While this is relatively straightforward for most streams (CCTV, phones, etc), putting RF on IP, is like

-          Driving a road over a car to get from A to B or

-          Putting the base station on a middle earth orbit for stationary users to make connections...

In other words, it’s more usual to put IP on RF, than put RF on IP.
We don’t want to bring the RF out of the RF domain because it’s status, and while there is one supplier, we’re keen to look for technically advanced product as our assembly needs to outperform existing product.
The RF frequency is anything from 10Mhz to 2Ghz
Anyone have anything to sell for this would be most welcome. Thank you!

Pilot quantities initially leading to hundreds over 3 years.


Please contact: dbeck@isatnetworks.com

iSat would like to wish everybody a happy St Georges day.

iSat’s miniature X-Band VSAT

iSat LTD's the leading provider of quality solutions for satellite ground segments.

We're a quickly expanding British company based in Farnborough's engineering district near Farnborough airport. with over 27 years experience in the satellite industry we are well equipped to provide a complete, full turnkey solution. From Systems design to provisioning, we cover RF, IP networks and baseband plus management solutions.

Contact us today on +44 (0)1252 750812 or visit www.isatnetworks.com today.

Introducing iSat’s new miniature X-Band VSAT

Introducing iSat’s new miniature X-Band VSAT
·          10W BUC FILTERS LNB FEED OMT
·          Driven directly from iDirect
·          Compatible with most Prodelin offset refractors
·          Approved for use with most X-band satellite operators

iSat LTD: The complete solutions provider.

Are you looking for a complete, full turnkey solution? We are the leading provider of quality solutions for Satellite ground segments. From Systems design to provisioning, we cover RF, IP networks and baseband plus management solutions.

We have over 25 years experience in providing bespoke solutions designed to meet and exceed the needs of those we work with. Contact us today on +44 (0)1252 750812 or visit www.isatnetworks.com today



About iSat

Integrated satellite applications technologies (iSat) is a consulting value added reseller of satellite equipment with over 25 years operational experience in satellite ground stations. We are the leading provider of quality solutions for satellite ground segments, Systems design & provisioning covering RF, IP networks and baseband plus management solutions. 

A selection of some of our products can be found below. 

Ka 985 

Copyright iSat LTD. All rights reserved.
iSat 3.2 - 3.35 Radome

Also available in 4.5 meter; iSat’s Radome weatherproof enclosure creates a protective barrier between your investment and the outside  world protecting your investment from wind, rain and ice, as well as debris and rotational irregularities. The protective layer is matched to your frequency of operation to reduce the effects of attenuation. The Radome reduces antenna de-tuning and conceals it, and other equipment from the public. 

Suitable for 1.8mtr antennas.
Options:
Entry hatch
Snow sensor / heater + de-humidifier combo
Air conditioning
Steel ring and floor plus antenna post mount


Specification for 3.2 / 3.35 meter Radome
Diameter:

3.20 meters (Internal Minimum)
3.35 meters (External Maximum)
Radome Dimensions:
Drawing no.17-1035.
Construction:

Moulded Composite in 8 quarters x 8 Longitudinal Joint white gel coat finished.
Environmental Conditions:
Applicable for shipborne environment waterproof according t0
Frequency Range:
3.7 to 4.2 GHz (C-Band)
10.7 to 12.95 GHz (Ku-Band).
Antenna Type:
Dish 2.4m mounted on X/Y Positioner.
Attenuation:
0.3dB max. at C-Band,
Radome Finish:
0.8 dB max. at Ku-Band.
Temperature Range:
1 coats of UV screened gel coat
Wind Load:
-35 to 60 degrees C. Operational 100 Knots Wind.
Survival 130 Knots Wind.
Radome weight:
280 Kg.
Handling and Lifting Provisions:
To be provided by supplier

iSat offers advanced RMA portal.

iSat offers advanced RMA portal offering:

- Immediate RMA response 
- Up to date progress on repairs
- No hassle diagnosis and repair of all satellite equipment.

The iSat RMA portal has been growing in popularity as it reduces turnaround times for repairs.

Our straightforward system means you don't need to convince the supplier that a product’s faulty before making a return. We accept all returns for diagnosis, testing and repair reducing your hassle and speeding up decision making.

This tried and tested system has grown organically over a couple of years and now includes most manufacturers’ products. 

With well established lines of communication to all major satellite brands, we’re able to offer a one-stop-shop for all makes and types of equipment.

5 Advantages of iSat’s comprehensive Repair and Support Service:
 Increased return on investment by extending the product’s life and reducing the number of spares required in a spares support system. 
 Environmental impact reduced through repair & reuse rather than buying new and many repairs are undertaken in UK reducing freight emissions.
 High quality repairs help ensure maximum reliability is maintained. 
 Rapid turnaround - Fast, efficient repairs ensures the spares you rely on are returned working reducing potential loss of service.
 One Stop Service - We will take care of the repairs leaving you more time to do what you do best. 


We are always looking to provide the best possible product range and services, so that's why we would like to invite you to get in touch. 
How can we help with your project?
+44 (0)1252 750812
www.isatnetworks.com
At iSat we believe the best way of show our capability is through our previous projects. That’s why we've set up a case studies page on our website outlining some of our experiences over our 25 years in the satellite industry. 

View iSat's Case Studies here.


Satellite products are famed for the reliability, and so when things do go wrong, the product is often very old or obsolete and the companies that supplied the goods have often been acquired by another company. Getting original manufacturers to support these products is often problematic, and replacing these products with new can be impractical given the tendering, testing and qualification costs.

Just such a situation arose when a customer within the Astrium group returned some equipment. It was used in a stabilized platform meaning replacing with new would have meant re-qualification costs. iSat used their skills and experience to repair the most obvious physical and electrical damage and for a reasonable fee prevented the long process of replacing with new media converters. This is just one example of many where iSat repair facility is able to save customers time and expense by using our skills and experience to repair defective equipment.

Learn more: http://www.isatnetworks.com/case-studies/4580829213