Whose famous brand 1.8mtr do you think this could be?

It shows a comparison of the focus in Azimuth compared to Elevation- and the reflector is not focused at the same point. The resulting antenna efficiency is less than 40%.

In studies, we found this type of performance on 1.2 and 1.8 antennas of various big brand names in SMC encapsulated mesh-type manufacturers.

iSat is a specialist VSAT manufacturer and we protect  customers from poor performance by technical selection of antennas in frequency bands such as Ka-band, X-band and App 30b frequencies. We measure antennas to ensure performance.

iSat recently introduced a unique range of specialist antennas transmitting at 18GHz, receiving at 22GHz with efficiency

• 2mtr 65%
• 8mtr 60%

Making certain that the output is comparable to link budget assumptions.

iSat stands for high quality specialist VSAT terminals. Contact us today for this and other specialist bands such as 27.5 to 29.5GHz bands.

www.isatnetworks.com 

iSat Delivers Pilot VSATs to Begin Commercializing Es’hail 1 Ka-band Transponders

Doha, Farnborough, 20th October, 2014 - Es’hailSat, the Qatar Satellite Company and Integrated Satellite Applications Technologies Ltd (iSat) registered in UK, announced the delivery and installation of two pilot VSAT terminals at Es’hailSat’s headquarters in Doha, Qatar, to enable the commercialization of the Ka-band payloads on Es’hail 1.

Es’hailSat was established in 2010 to provide advanced satellite services to strategic stakeholders and customers who value communications independence, quality of service and wide geographical coverage.  Es’hail 1, the company’s first satellite was launched in Q3 2013.

The installation of this new, specialized satellite communications equipment allows Es’hailSat to offer superior coverage and secure connectivity for business and government services across the whole MENA region.  Dedicated telecommunications services including broadband Internet access, corporate networks and similar services will be possible on Es’hail 1 using small fixed or mobile antennas.

iSat, which designs, manufactures and installs bespoke satellite earth stations and VSATs worldwide to optimize the use of bandwidth for satellite operators and their customers, delivered a 1.2m transmit and receive VSAT terminal designed to work with Es’hailSat’s “Mission 4” Ka-band transponders, and a 1.2m uplink designed to work with Es’hailSat’s “Mission 3” Ka-band transponders.

The development of the VSAT equipment involved designing, integrating and testing feeds specific to the Mission 3 and Mission 4 Ka-band frequencies with existing reflectors to ensure performance compliant to international standards for antenna side lobe and cross-polar patterns. The integration also involved sourcing the other components of a conventional VSAT for these frequencies – BUCs, LNBs, OMTs, and TRFs.

Hamad Al-Mannai, Es’hailsat’s Chief Commercial Officer said, “We are pleased to be working with iSat on this project as they have proven expertise in providing bespoke systems for Ka-band satellite services.  As a new satellite operator it is important for us to be able to provide our customers with both superior coverage and to fully support their network connectivity”. 

David Harper, CEO of iSat said, “The reason that iSat wins these open tenders is due to our experience designing and manufacturing VSATs for satellite operators with challenging transponder frequencies.  Whereas the HDFSS Ka-band market has a variety of highly competitive VSAT suppliers, the frequency area below 29.5GHz is where our customers appreciate iSat’s skills and experience as a terminal manufacturer. Our purpose is to work with Es’hailSat to develop further terminals in the range to help them optimize the use of their bandwidth and increase the commercialization of their satellite fleet”.

Learn more about: Es’hail 1 / Eutelsat 25B KA-SAT footprint.

5 practical ways iSat is boosting connectedness through online marketing.

iSat is always looking to make new connections across the industry and interested parties. We’ve quickly put together 5 methods we’ve been successfully using which helps us achieve this. Do let us know your thoughts and own tips for boosting connectedness!

1.     We’ve been focusing more on our mobile site as of late. We’ve introduced the ability for phones to connect to PDF files via the magic of Google’s mobile doc’s display. Now even phones unable to see PDF’s can view them in a normal browser window. (This also works for PDF’s opened via computer). To allow phones to see PDF files simply enter “ https://docs.google.com/gview?url= “ before a PDF URL.

2.     We’ve added QR codes to our website, One QR code will neatly add iSat’s contact details to your phone which can then be saved as a contact without a single key press. More interestingly though we’ve used the above Google PDF reader to make QR codes which open our datasheets and product files allowing for quick access on the move. Try this out for yourself: www.isatnetworks.com

3.     iSat’s twitter account has just passed the 1,000k mark and we’re lucky enough to have a wide array of interesting followers who have a genuine passion for the industry. @iSat_LTD delivers industry news, quality original content as well as being extremely engaging. We are also keen followers of some very interesting industry sources which also keeps us in the loop. 

4.     iSat is experimenting with some advanced and personalized forms which deliver targeted personalized functionality. We are still experimenting with these features.

5.     The last part of this list is the most important, listening to our customers and offering the best solution to meet their requirements. iSat LTD is famed for our ability to deliver specialist frequency’s and personalized solutions even in difficult conditions. Being responsive to changing market and customer demands is a good recipe for long term success!

Do let us know your thoughts on this and add any methods you’ve has success with! 

http://www.isatnetworks.com/news/

iSat ltd's move to the Cody Technology Park. 

As some of you may know iSat has recently moved to the Cody Technology Park. The new building is perfect for our needs and the atmosphere feels warmer and happier. We've also gained access to the shared facilities like the coffee shop, restaurant and gym in addition to other onsite advantages. We're also situated next to a nature reserve which allows for pleasant lunchtime walks. 

iSat will continue to offer leading systems design & provisioning covering RF, IP networks and baseband plus management solutions and we're also working on some technical upgrades which will feature industry leading ease of use. 

iSat's new HQ building in the Cody Technology Park.

Read more: iSat moves to Cody Technology Park.

Are you looking for a new purpose and challenge?

We are a systems integrator working for a ME satellite operator, and we’re becoming inundated with project/technical management work.  We would like to take on someone to assist in preparing/writing tenders and testing/integrating/installing/training/documenting projects. We would like to know if anyone is currently looking for a new challenge in small multi-talented team in the Farnborough area.

If this role would interest you then please forward a copy of your CV and a covering letter for review, potentially leading to a meeting. Depending on experience and because we are a small company with big growth prospects, we’re able to configure long term rewards which reflect the effort and contribution made.

All applicants must be able to work in the UK at our headquarters based near the Farnborough Air show.

Thank you and

Very kind regards

David Harper

CEO iSat Ltd

To learn more about iSat LTD:

www.isatnetworks.com

Please send your application to:

info@isatnetworks.com

"iSat install highly efficient Ka systems reducing unwanted loss and maximizing use of expensive amplifiers.

This antenna did not support weight of the amp when mounted on the boom arm, so in this example the amp is fully moveable in Azimuth, but the loss in the waveguide network is less than 0.5dB, compared with over 2dB if traditionally mounted on the antenna post."

"iSat work extensively in Ka band and are especially expert in system below 29.5GHz".

Read about: iSat develops Ka antenna with special feed to save 2dB at Ka- unique opportunities for early adopters. 

Antenna Reflector recommendation.

Hello, we were wondering if you could help us and our customer by recommending a manufacturer of antenna reflectors who is willing to sell the reflector and backing mount structure and boom arm/feed holder without the post nor the feed, but with the F/D ratio.

We know we can visit the very highly reputable main suppliers who will give us a comprehensive solution, but our customer has established antennas and doesn’t need the full turnkey. Please let us know if there are reflector manufacturers.

The need is tx/rx and at Ku band. We will need to mount our own feed for operation at our own frequency, but Ku reflector will be good for what we need.

Very kind regards

David

iSat

info@isatnetworks.com

Seeking product to put RF on to IP channel.

Dear all,

We’re in the market for a product to put RF on to IP channel.

Clearly we’re using the IP to multiplex a lot of traffic and put it over satellite.

While this is relatively straightforward for most streams (CCTV, phones, etc), putting RF on IP, is like

-          Driving a road over a car to get from A to B or

-          Putting the base station on a middle earth orbit for stationary users to make connections...

In other words, it’s more usual to put IP on RF, than put RF on IP.

We don’t want to bring the RF out of the RF domain because it’s status, and while there is one supplier, we’re keen to look for technically advanced product as our assembly needs to outperform existing product.

The RF frequency is anything from 10Mhz to 2Ghz

Anyone have anything to sell for this would be most welcome. Thank you!

Pilot quantities initially leading to hundreds over 3 years.

Please contact: dbeck@isatnetworks.com

iSat would like to wish everybody a happy St Georges day.

iSat’s miniature X-Band VSAT

iSat LTD's the leading provider of quality solutions for satellite ground segments.

We're a quickly expanding British company based in Farnborough's engineering district near Farnborough airport. with over 27 years experience in the satellite industry we are well equipped to provide a complete, full turnkey solution. From Systems design to provisioning, we cover RF, IP networks and baseband plus management solutions.

Contact us today on +44 (0)1252 750812 or visit www.isatnetworks.com today.

Introducing iSat’s new miniature X-Band VSAT

Introducing iSat’s new miniature X-Band VSAT

·          10W BUC FILTERS LNB FEED OMT

·          Driven directly from iDirect

·          Compatible with most Prodelin offset refractors

·          Approved for use with most X-band satellite operators

iSat LTD: The complete solutions provider.

Are you looking for a complete, full turnkey solution? We are the leading provider of quality solutions for Satellite ground segments. From Systems design to provisioning, we cover RF, IP networks and baseband plus management solutions.

We have over 25 years experience in providing bespoke solutions designed to meet and exceed the needs of those we work with. Contact us today on +44 (0)1252 750812 or visit www.isatnetworks.com today

About iSat

Integrated satellite applications technologies (iSat) is a consulting value added reseller of satellite equipment with over 25 years operational experience in satellite ground stations. We are the leading provider of quality solutions for satellite ground segments, Systems design & provisioning covering RF, IP networks and baseband plus management solutions. 

A selection of some of our products can be found below. 

Non pen mount 2.4m MK II	OpenRCS-4800R Modem
Remote Vessel Fuel Monitor	VSATs
160Wh V-Lock Battery	4.5 meter Radome
iSat X-Band BUC 7900-8400 MHz	10U air-air shock mounted 19inch rack
Ka 985	VSAT Power Solutions
Earth Stations & VSATs	Earthquake sensing platform
SA 1272 Lightning protection on roof mount	Expert RF Design
App. 30b VSAT	Stabilised platform
External Air con units	The Homesteader
3.2 - 3.35 Radome	Ka Band Brochure
iSat GBB VSAT	iSat Global Bandwidth Tripod
Hard packing cases for 1.2 and 2.4 VSATS	Climate Controlled LNA Cooler
Fast and light 1.2M system	1800+ Technical Specifications
SA 1272 Lightning protection on ground mount	Customised Communications Cabins
Training brochure	Ka 750
De-ice for VSAT	AV Integration
1200 Specifications

Copyright iSat LTD. All rights reserved.

iSat 3.2 - 3.35 Radome

Also available in 4.5 meter; iSat’s Radome weatherproof enclosure creates a protective barrier between your investment and the outside  world protecting your investment from wind, rain and ice, as well as debris and rotational irregularities. The protective layer is matched to your frequency of operation to reduce the effects of attenuation. The Radome reduces antenna de-tuning and conceals it, and other equipment from the public. 

Suitable for 1.8mtr antennas.

Options:

Entry hatch

Snow sensor / heater + de-humidifier combo

Air conditioning

Steel ring and floor plus antenna post mount

Specification for 3.2 / 3.35 meter Radome

Diameter:	3.20 meters (Internal Minimum) 3.35 meters (External Maximum)
Radome Dimensions:	Drawing no.17-1035.
Construction:	Moulded Composite in 8 quarters x 8 Longitudinal Joint white gel coat finished.
Environmental Conditions:	Applicable for shipborne environment waterproof according t0
Frequency Range:	3.7 to 4.2 GHz (C-Band) 10.7 to 12.95 GHz (Ku-Band).
Antenna Type:	Dish 2.4m mounted on X/Y Positioner.
Attenuation:	0.3dB max. at C-Band,
Radome Finish:	0.8 dB max. at Ku-Band.
Temperature Range:	1 coats of UV screened gel coat
Wind Load:	-35 to 60 degrees C. Operational 100 Knots Wind. Survival 130 Knots Wind.
Radome weight:	280 Kg.
Handling and Lifting Provisions:	To be provided by supplier

iSat offers advanced RMA portal.

iSat offers advanced RMA portal offering:

- Immediate RMA response 
- Up to date progress on repairs
- No hassle diagnosis and repair of all satellite equipment.

The iSat RMA portal has been growing in popularity as it reduces turnaround times for repairs.

Our straightforward system means you don't need to convince the supplier that a product’s faulty before making a return. We accept all returns for diagnosis, testing and repair reducing your hassle and speeding up decision making.

This tried and tested system has grown organically over a couple of years and now includes most manufacturers’ products. 

With well established lines of communication to all major satellite brands, we’re able to offer a one-stop-shop for all makes and types of equipment.

5 Advantages of iSat’s comprehensive Repair and Support Service:
 Increased return on investment by extending the product’s life and reducing the number of spares required in a spares support system. 
 Environmental impact reduced through repair & reuse rather than buying new and many repairs are undertaken in UK reducing freight emissions.
 High quality repairs help ensure maximum reliability is maintained. 
 Rapid turnaround - Fast, efficient repairs ensures the spares you rely on are returned working reducing potential loss of service.
 One Stop Service - We will take care of the repairs leaving you more time to do what you do best. 


We are always looking to provide the best possible product range and services, so that's why we would like to invite you to get in touch. 
How can we help with your project?
+44 (0)1252 750812
www.isatnetworks.com

At iSat we believe the best way of show our capability is through our previous projects. That’s why we've set up a case studies page on our website outlining some of our experiences over our 25 years in the satellite industry. 

View iSat's Case Studies here.

Satellite products are famed for the reliability, and so when things do go wrong, the product is often very old or obsolete and the companies that supplied the goods have often been acquired by another company. Getting original manufacturers to support these products is often problematic, and replacing these products with new can be impractical given the tendering, testing and qualification costs.

Just such a situation arose when a customer within the Astrium group returned some equipment. It was used in a stabilized platform meaning replacing with new would have meant re-qualification costs. iSat used their skills and experience to repair the most obvious physical and electrical damage and for a reasonable fee prevented the long process of replacing with new media converters. This is just one example of many where iSat repair facility is able to save customers time and expense by using our skills and experience to repair defective equipment.

Learn more: http://www.isatnetworks.com/case-studies/4580829213

I visited the Satellite Catapult to attend the SME day last Friday. The UK’s Satellite industry is already a significant and profitable contributor to the UK economy and the Department for Business, Innovation & Skills is looking to expand upon that success. This is clearly a very genuine effort to encourage growth in the satellite industry. Never before has the UK’s government focused so heavily on our industry and made it such a strategic priority. So what will our industry’s role be in Britain’s future?

There are some growth strategies the government’s best placed to implement. You may say they should be working to help the industry anyway, but with strategic focus it should get done quicker. Regulatory changes to allow the development of space ports and allow foreign companies to see their developments would be welcomed here. Influence with ITU and increased ESA funding (which should come back our way). All good stuff.

What I also admire is that they are not directly spending money or picking winners. They facilitate introductions to funding through the Satellite Finance Network. We all know “The City” raises money – like the debt finance- for Apple, and the IPO of the Post Office. What is also a “truism” is the difficulty in raising small amounts of finance for small business. The Catapult is connecting smaller business with investors eager for a return in the fast growing SME sector- and with a turnover of £30Bn by 2030 it is attracting a lot of interest.

On the other hand, expanding the current exports from £2Bn now to £25Bn by 2030 is a daunting prospect. Can the governmental environment really have such a huge impact? In conclusion- I’m really happy to be in satellite at the moment, and iSat has huge experience in export to Africa and Middle East, and is excited by the prospect of increasing business to these regions. 

iSat announces Heads of Terms agreement with Atlas mounting.

ISAT LTD, ENGLAND- (Hampshire) -- 07/08/13 – Integrated Satellite Application Technologies (iSat), A systems integrator specialising in satellite earth stations for frequencies such as X-band and Ka band for use by government, satellite operators and broadcasting organisations, today announced that it signed a heads of agreement to purchase Atlas Mounting for a deferred cash consideration.

Atlas Mounting initiated the idea of lighter non-penetrating mounts for 2.4mtr antennas made out of Aluminium material. For the last 6 months, iSat have re-engineered the satellite mounts from the ground up and produced mounts that retain their weight advantage, but have increased their durability and robustness. These objectives were achieved by utilising durable aircraft grade aluminium and pioneering a tangential system of supports which resulted in less torque and increased strength. A modular design which minimised components and deployment time was also utilised. The overall weight for a 2.4mtr mount is 75Kg, and iSat have placed a heavy emphasis on good customer service so packing with 6 carry handle straps allows for easy man handling off lorries, and deployment to roofs - which often have restricted access. Compare this to a 325Kg steel mount normally delivered with a 2.4mtr Prodelin antenna, and you can imagine that this new mount takes the physicality out the earth station construction.

Owning the drawings and being able to adjust for special situations will gradually grow the product range. Accessories such as mounts for solar panels can be integrated into a final solution.

To find out more please go to: www.isatnetworks.com

iSat banner design prototype.

iSat: Introducing New NPM Design!

iSat’s Mark II 2.4 mtr NPM is now available giving higher wind resistance and greater protection against the elements.

Above: Single tray deployed. Above: All components designed to fit into the post on the right. Improvements Built using powder coated Aluminium New bracing brackets Prevents twisting forces. Improved finish Reduced rough edges. Retained benefits Lightweight -                     55Kg single tray -                     70Kg double tray Reduced transport costs. Components fit into central post Safer, easier & much less packaging. Fast deployment Reduced nuts/bolt count. Efficiently designed Easier to build and less to go wrong.  *optional cloth carry case *mounts to fit all antenna sizes. About iSat Integrated satellite applications technologies (iSat) is a consulting value added reseller of satellite equipment with over 25 years operational experience in satellite ground stations. For more information contact iSat on: +44 (0)1252 750812 www.isatnetworks.com