iSat experience covers many countries across the EMEA region. Monitor and control has been a major feature of many installations, and iSat have experience with a number of customer preferred software systems. Equipment interface range from serial, I/O and SNMP. All equipment is seamlessly presented on a front GUI screen.
Broadcast market has always been a major market for iSat. Re-fitting CPI amplifiers into a neat range of 3 racks provides a satisfying appearance when installed at the earth station.
iSat Integration
iSat have experience of rack and VSAT integration since 1990's and designs can be quickly amended to meet new integration requirements.Designs available include RF patch panels and shelves containing splitters, combiners, line drivers, with monitor points to front or rear or both. These shelves may can also contain L-band manual or motorised switch, dc inserters, and L-band break out panels for cross-site cables etc.
Design of rack layouts is a speciality which delivers reliable and easy to use layouts. Experience takes into consideration ventilation for electronic equipment, power distribution, cable type, and cable layout for ease of maintenance. Each rack comes with wiring diagram, wiring list with cable numbers, and each cable has that number on each connector.
iSat has built earth station RF communication cabins which are resilient independent equipment rooms with a high level of signal security. Features include redundant 3 phase mains input, redundant air-conditioning, gland and interface panels for waveguide and fibre with designs to hold 2, 3, 4 or 5 racks.
Experience in flyaway and fixed VSAT terminals has created power solutions that can source power from 12 and 24 Volt battery, solar and petrol generators. iSat use only IATA safe Lithium battery compatible with transport by air.
Resilience is available against cold and windy locations where Radomes are required for Ku and X-band VSAT terminals.
These solutions allow iSat to respond with intelligent suggestions for almost any RF integration challenge.
iSat develops X-band terminal for Spainsat X-band.

This new terminal consists of a single piece aluminium antenna center fed and EIRP values in the range 52 to 62 dBW.
iSat can offer this, and other exclusive solutions tailored to meet the needs of our partners like no other!
Download our exclusive datasheet to find out more: X-Band 2.4mtr single piece VSAT
iSat latest news, IBC2015 & Ka band developments.
iSat has been using our in-house design and manufacturing capabilities to create bespoke feeds for specialist terminals. iSat is uniquely placed to engineer the perfect solution to meet our clients’ needs. Our in-house production is optimised for production levels between 100 – 1,000 units. Contact us to learn more about our bespoke design and manufacturing capabilities.
iSat is in the process of developing technology to revolutionize the Ka band market. The feeds we’re developing outperform the competition offering more gain and less amps. iSat has a long history of bringing innovative product solutions to market and we have the skills and expertise to deliver.
iSat LTD attended the IBC2015 conference from the 10th to the 14th of September. The IBC Conference is an unrivaled global destination for discussion and debate about the many different challenges facing the electronic media and entertainment industry, both in its sessions and in the range of networking opportunities it affords. We would like to see you there!
iSat develops Ka antenna with special feed to save 2dB at Ka- unique opportunities for early adopters.
iSat develops Ka antenna with special feed to save 2dB at Ka- unique opportunities for early adopters.
24th Sep 2014. iSat LTD has developed Ka band antenna systems with a special feed focus, saving 2db in miss-point error for 1.8mtr antennas which offers benefits in terms of reduced BUC size and better G/T. We’re looking for partners and early adopters to join us in trialling this exciting expansion to our capabilities.
The product improves the performance of ka-band networks, which will help our customers capture their customers and commercialise Ka-space segment.
If you’d like to be at the cutting edge of technological innovation and start commercialising your ka-band, then contact us now for a special early adopter rate.
iSat LTD
01252 750812
iSat M4 feed for use with Es’hailSat and Eutelsat at 25.5 degrees East.
iSat have designed and developed an M4 feed for use with Es’hailSat and Eutelsat at 25.5 degrees East which offers Ka coverage over the whole MENA region.
We are a specialist VSAT manufacturer based in Farnborough’s technology district with expertise in providing bespoke solutions. Our focus is on systems design & provisioning covering RF, IP networks and baseband plus management solutions.
We can offer exclusive solutions tailored to meet the needs of our partners like no other!
This 1.2mtr provides tx 18.1 to 18.4GHz
And 21.4 to 21.7GHz for receive.
Used exclusively in iSat terminals.
View the Eutelsat M4 Ka band VSat Terminals PDF
View the Es'hailsat M4 Ka band VSat Terminals PDF
We are a specialist VSAT manufacturer based in Farnborough’s technology district with expertise in providing bespoke solutions. Our focus is on systems design & provisioning covering RF, IP networks and baseband plus management solutions.
We can offer exclusive solutions tailored to meet the needs of our partners like no other!
This 1.2mtr provides tx 18.1 to 18.4GHz
Used exclusively in iSat terminals.
View the Eutelsat M4 Ka band VSat Terminals PDF
View the Es'hailsat M4 Ka band VSat Terminals PDF
John Yates joins iSat as non-executive board director.
David Harper CEO of iSat said, “I’ve known John for a number
of years, and it’s an enormous privilege to be working with John on our new
exciting VSAT terminals for special frequency bands at Ka-band and below. We’ve
already submitted our first project under the ESA Newcomers Initiative and eagerly
anticipate its conclusion and early commercial exploitation.” John Yates said,
“I’m extremely pleased to be joining the board of iSat and working with David at such an exciting time for the company.
Read More: John Yates joins iSat as non-executive board director
Read More: John Yates joins iSat as non-executive board director
|
|
X-band swappable feed
on C-COM’s iNetVu® 1200 platform
|
Integrated Satellite Applications Technologies Ltd (iSat at URL
www.isatnetworks.com), an innovative, value-added systems integrator with
over 25 years of experience in ground station satellite transmission
solutions, announced today that it has developed a unique swappable X-band
feed for the C-COM manufactured 1.2M Ku-band Auto Deploy iNetVu®
transportable system.
This revolutionary terminal has been developed to accommodate X-band
BUC powers from 10 to 40 watts and can be transported in 3 lightweight and
reasonably sized transportable cases. Building on the renowned quality of the
iNetVu® mobile antenna systems, this development meets the needs of
governments looking for increased flexibility and value. The iSat / C-COM
transportable solution meets all relevant technical and safety requirements,
and has been successfully range tested for compliance with ITU
specifications.
“X-band is a growing market for customers wanting highly resilient
satellite communications solutions to operate in times of stress when
traditional mobile and fixed communication infrastructures are unavailable or
unable to support the volume of traffic” says David Harper, CEO of iSat.
“This development of the iNetVu® terminal uses the iSat developed compliant
and proven X-band filters, feed, BUC and reflector, and seamlessly integrates
them onto the proven iNetVu® platform, offering a complete communications
solution out of the box.
“C-COM has been working with iSat to make it possible to expand the
capabilities of our iNetVu® mobile antennas to include X-Band”, said Leslie
Klein, President and CEO of C-COM. This new option on our 1.2M mobile
antennas will open up new markets for both C-COM and iSat customers
worldwide. Availability of X-Band on the iNetVu® antenna systems will make it
possible to offer a combined iSat/C-COM solution to military and government
organisations who rely on the use of this satellite frequency”.
“The iNetVu® platform, including the proprietary 7000 antenna
controller unit, is an outstanding piece of kit”, adds Harper. “The C-COM
unit was also selected for its resilience to withstand severe outdoor
temperatures, from the Sahara to Siberia, and for its flexible construction
which allows for packaging options that are lighter and smaller than many of
its competitors.”
See this exciting development at Cabsat stand S-K42 and at Washington
Satellite stand 1924 and discuss this and other revolutionary solutions to
deliver technical and operational progress for you and your customers.
|
About
iSat
Integrated
satellite applications technologies (iSat) is a consulting value added
reseller of satellite equipment with over 25 years operational experience in
satellite ground stations. We are the leading provider of quality solutions
for satellite ground segments, Systems design & provisioning covering RF,
IP networks and baseband plus management solutions.
|
iSat X-band terminals and services! www.isatnetworks.com
|
|
||
X-band terminals
|
||
iSats
X-Band terminals are built to last. They are
able to stand temperatures of
-50°F to 160°F (-46ºC to 71ºC) and are built to withstand wind speeds of up
to 125 mph, That’s over 200km/h! iSat can also provide an integral
air-conditioner for use in hot climates or
electrical anti-icing systems for cold climates. Additionally
Lightning protection can be included to ensure maximum protection even in a
storm.
iSat not only provides the terminal’s but has an extensive range of
technology’s to protect and augment functionality:
ü The terminals are available in various antenna
sizes and maximum EIRP levels.
ü The entire RF package (transceiver and LNB)
is located on the antenna.
ü Strategically placed shielding provides
protection from excessive solar radiation affecting the active components
protecting your investment and maximising longevity.
ü An optional shocked mounted rack/ flight case contains the indoor
equipment, including a PSK modem and space for customer equipment. This case
can be fitted with an integral air-conditioner for use in hot climates. For
cold climates, electrical anti-icing systems are available.
ü Optional quick release waveguide connectors are available for
applications that require rapid equipment replacement.
ü Other options include fibre optic IFL, voice
/ data multiplexers, routers, etc.
ü The VSAT network can be anchored to our range of hub
stations comprising of antennae from 3.7m upwards and air-conditioned
equipment cabins.
iSats terminals
can be used in star and mesh based networks and operates with standard serial
terrestrial data interfaces including Ethernet ensuring maximum compatibility
with almost any system. Additionally the entire RF package (transceiver and
LNB) is located on the antenna.
Each terminal is
supplied with set of Installation tools and can be supplied in re-useable
wooden packing cases.
With over 25 years experience and in-house engineers, we can find your
perfect solution.
|
||
|
About iSat
Integrated satellite applications
technologies (iSat) is a consulting value added reseller of satellite
equipment with over 25 years operational experience in satellite ground
stations. We are the leading provider of quality solutions for satellite
ground segments, Systems design & provisioning covering RF, IP networks
and baseband plus management solutions.
|
Subscribe to:
Posts (Atom)






